LEED-AP-ID-C 試験問題を無料オンラインアクセス

Occupancy numbers must be reported consistently across multiple LEED credits. Which of the following prerequisites/credits require using the Occupancy numbers?

• A.Location and Transportation Credit, Bicycle Facilities;
  Indoor Environmental Quality Prerequisite Minimum Indoor Environmental Quality Performance; Indoor Environmental Quality Credit, Quality Views
• B.Location and Transportation Credit, Bicycle Facilities;
  Water Efficiency Credit, Indoor Water Use Reduction;
  Indoor Environmental Quality Prerequisite Minimum Indoor Environmental Quality Performance
• C.Location and Transportation Credit, Access to Quality Transit;
  Water Efficiency Credit, Indoor Water Use Reduction;
  Indoor Environmental Quality Credit, Interior Lighting
• D.Location and Transportation Credit, Access to Quality Transit;
  Water Efficiency Credit, Indoor Water Use Reduction;
  Indoor Environmental Quality Credit, Quality Views

What strategy contributes to achievement of Materials and Resources Credit, Construction and Demolition Waste Management?

• A.Use on-site soil to re-grade garden
• B.Reuse existing plumbing fixtures
• C.Reuse furniture from the existing space
• D.Return removed carpet to the manufacturer

The site of a new open-plan office building is located near a highway. The acoustic consultant is investigating the possibility of using sound masking system to cover the noise impact from the busy road. If sound masking is found to be a feasible option, the noise design of the project can have a maximum limit up to

• A.70 dBA
• B.36 dBA
• C.62 dBA
• D.48 dBA

Which of the following prerequisites or credits is affected by using plug-in devices when attempting to achieve Indoor Environmental Quality Credit, Thermal Comfort?

• A.Energy and Atmosphere Prerequisite, Minimum Energy Performance
• B.Energy and Atmosphere Prerequisite, Building Level Energy Metering
• C.Energy and Atmosphere Credit, Advanced Energy Metering
• D.Energy and Atmosphere Credit, Demand Response

Design is underway for a new tenant suite with 4,000 ft2 (371.6 m2) of net occupiable area. The project build-out will include all new HVAC systems. Operable windows are installed as follows:
A total 75 ft2 (7.0 m2) located within 15 ft. (4.6 m) of all spaces
. A total 50 ft2 (4.6 m2) located within 25 ft. (7.6 m) of all spaces
Which design and documentation strategies must be used to demonstrate compliance with Indoor Environmental Quality Prerequisite, Minimum Indoor Air Quality Performance?

• A.Install 25 ft2 (2.3 m2) of new operable windows within 25 ft. (7.6 m) of all spaces and tabulate the total area of operable windows to indicate compliance
• B.Tabulate the total area of operable windows to indicate compliance. No mechanical outside air systems required for space HVAC design
• C.Provide new mechanical outside air systems in compliance with ASHRAE 62.1-2010 and document compliance by tabulating rates in compliance with the standard
• D.Provide MERV 13 (F7) filters on the new HVAC system air handling units. No mechanical outside air systems required for space HVAC design