SMI300XE 試験問題を無料オンラインアクセス

What information is shown in the IPMI storage monitoring section?

• A.Overheating issues
• B.The motherboard
• C.Attached storage devices
• D.Severity of health events

How many GPUs can be missing or undetected by the system to successfully execute the ROCm software commands?

• A.1
• B.2
• C.None
• D.3

The ROCm commands are not providing output or are failing. What could be the primary reason why?
And how can you validate the reasoning?

• A.CPU is not installed correctly on the server. Review the OS dmesg logs for any odd CPU messages, then if located proceed to reseat the CPU.
• B.If more than 3 GPUs are missing, then ROCm commands will not function. We need to verify that the 3 are missing in the IPMI GUI and review the GPU component section to make sure that at least 2 or fewer GPUs are missing.
• C.You suspect there are GPUs not detected. To determine which GPUs are missing, open the IPMI GUI and review the GPU component section to make sure all GPUs are present.
• D.The GPU baseboard may not be detected. You can determine this by opening the IPMI GUI and reviewing the FW section.

When you first access the IPMI Web GUI, you will be prompted to log in. Where can you find the password?

• A.It will be on the tag next to the I/O Module.
• B.It will be on the label on the bottom of the system.
• C.Use the system model number as the password.
• D.It will be on the label on the bottom side of the system cover.

What tool is needed to remove the GPU in the MI300X system?

• A.Security Torx Bit
• B.Phillips Head Screwdriver
• C.T15 Torx Bit
• D.T20 Torx Bit