101-01 試験問題を無料オンラインアクセス

When deploying a Steelhead appliance in a physical in-path configuration, the cable between the Steelhead and the router should be:

• A.Token Ring
• B.Crossover
• C.Straight-through
• D.None of the above

You wish to pass-through traffic to a particular server from a large number of remote sites, all optimized by SteelHeads. You know that it can be done on a single SteelHead. Which type of rule would you configure?

• A.In-path pass-through rule on the client-side SteelHead
• B.In-path pass-through rule on the server-side SteelHead
• C.Peering pass-through rule on the server-side SteelHead
• D.Peering pass-through rule on the client-side SteelHead

Which statement about virtual SteelHead is NOT true?

• A.It can perform auto discovery in an in-path deployment.
• B.It supports Quality of Service and Path Selection.
• C.It only supports one in-path interface and must be deployed virtually in-path.
• D.It can fail to wire using VMware direct bypass feature from ESX 5.0 when utilising a Riverbed hardware bypass card.
• E.It can perform auto discovery in a virtual in-path deployment.

Automatic registration of devices with the SteelCentral Controller for SteelHead (SCC) requires which one of the following?

• A.The SCC must have joined the Windows domain
• B.Pre-trusted SSL certificates on the devices and SCC
• C.The serial number of the managed device to be preconfigured in the SCC
• D.RiOS 8.0 for SteelHead and 4.0 for Interceptor
• E.The name "riverbedcmc" to be an entry in DNS resolving to the SCC primary IP address

The default action performed by the Steelhead appliance when it receives a packet with an existing DSCP value 46 is to:

• A.Reflect the value received by the original packet
• B.Override the value with the value of AF11
• C.Override the value with a default of 0
• D.Reflect the value returned by the symmetric TCP flow