RH202 試験問題を無料オンラインアクセス

One Package named zsh is dump on ftp://server1.example.com under /pub/updates directory and your FTP server is 192.168.0.254. Install the package zsh.

• A.1. rpm -ivh ftp://server1/example.com/pub/updates/zsh-* or
  Login to ftp server : ftp ftp://server2.example.com using anonymous user.
  Change the directory: cd pub and cd updates
  Download the package: mget zsh-*
  Quit from the ftp prompt : bye
  Install the package
• B.1. rpm -ivh ftp://server1/example.com/pub/updates/zsh-* or
  Login to ftp server : ftp ftp://server1.example.com using anonymous user.
  Change the directory: cd pub and cd updates
  Download the package: mget zsh-*
  Quit from the ftp prompt : bye
  Install the package
  rpm -ivh zsh-*
  Verify either package is installed or not : rpm -q zsh

Install the Redhat Linux RHEL 5 through NFS. Where your Server is server1.example.com having IP 172.24.254.254 and shared /var/ftp/pub. The size of the partitions are listed below: /-> 1048 /home -> 1028 /boot -> 512 /var-> 1028 /usr -> 2048 Swap -> 1.5 of RAM Size /storage configure the RAID Level 0 of remaining all free space. After completing the installation through NFS solve the following QUESTIONs. There are two networks 172.24.0.0/16 and 172.25.0.0/16. As well as there are two domains example.com on 172.24.0.0/16 network and my133t.org on 172.25.0.0/16 network. Your system is based on example.com domain. SELinux should be in enforce mode.

• A.Insert the CD on CD-ROM and start the system.
  In Boot: Prompt type linux askmethod
  It will display the language, keyboard selection.
  It will ask you for the installation method.
  Select the NFS Image from the list
  It will ask the IP Address, Net mask, Gateway and Name Server. Select Use Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.
  It will ask for the NFS Server Name and Redhat Enterprise Linux Directory. Specify the NFS Server: 172.24.254.254 Directory: /var/ftp/pub
  8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition
  screen by selecting the different Options.
  Create the partition According to the QUESTION because Size and what-what partition should you create at installation time is specified in your QUESTION
  Create the two RAID partitions having equal size of remaining all free space.
  Click on RAID button
  Type mount point /data
  Select RAID Level 0
  Click on ok
• B.Insert the CD on CD-ROM and start the system.
  In Boot: Prompt type linux askmethod
  It will display the language, keyboard selection.
  It will ask you for the installation method.
  Select the NFS Image from the list
  It will ask the IP Address, Net mask, Gateway and Name Server. Select Use Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.
  It will ask for the NFS Server Name and Redhat Enterprise Linux Directory. Specify the NFS Server: 172.24.254.254 Directory: /var/ftp/pub
  8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition
  screen by selecting the different Options.
  Create the partition According to the QUESTION because Size and what-what partition should you create at installation time is specified in your QUESTION
  Create the two RAID partitions having equal size of remaining all free space.
  Click on RAID button
  Type mount point /data
  Select RAID Level 0
  Click on ok
  Then select the MBR Options, time zone and go upto package selections. It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough. X-Window System GNOME Desktop (these two packages are generally not required) Administration Tools. System Tools Windows File Server FTP Servers Mail Servers Web Servers Network Servers Editors Text Based Internet Server Configuration Tools Base Printing Supports When installation will complete, your system will reboot. Jump for another QUESTION.
• C.Insert the CD on CD-ROM and start the system.
  In Boot: Prompt type linux askmethod
  It will display the language, keyboard selection.
  It will ask you for the installation method.
  Select the NFS Image from the list
  It will ask the IP Address, Net mask, Gateway and Name Server. Select Use Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.
  It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.
  8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition
  screen by selecting the different Options.
  Create the partition According to the QUESTION because Size and what-what partition should you
  Click on RAID button
  Type mount point /data
  Select RAID Level 0
  Click on ok
  Then select the MBR Options, time zone and go upto package selections. It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough. X-Window System GNOME Desktop (these two packages are generally not required) Administration Tools. System Tools Windows File Server FTP Servers Mail Servers Web Servers Network Servers Editors Text Based Internet Server Configuration Tools Base Printing Supports When installation will complete, your system will reboot. Jump for another QUESTION.

Successfully resolv to server1.example.com where your DNS server is 172.24.254.254

• A.1. vi /etc/resolv.conf
  nameserver 172.24.254.254
  2. host server1.example.com On every clients, DNS server is specified in /etc/resolv.conf. When you request by name it tries to resolv from DNS server .
• B.1. vi /etc/resolv.conf
  nameserver 172.25.254.255
  2. host server1.example.com On every clients, DNS server is specified in /etc/resolv.conf. When you request by name it tries to resolv from DNS server .

Add a new logical partition having size 100MB and create the /data which will be the mount point for the new partition.

• A.Use fdisk /dev/hda-> To create new partition.
  Type n ->For New partitions
  It will ask for Logical or Primary Partitions. Press l for logical.
  It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
  Type the Size: +200M You can Specify either Last cylinder of Size here.
  Press w to write on partitions table.
  Either Reboot or use partprobe command.
  Use mkfs -t ext3 /dev/hda?
  Or
  mke2fs -j /dev/hda? ->To create ext3 filesystem.
  vi /etc/fstab
  Write:
  /dev/hda? /data ext3 defaults 0 0
  33. Verify by mounting on current Sessions also:
  30. mount /dev/hda? /data
• B.Use fdisk /dev/hda-> To create new partition.
  Type n ->For New partitions
  It will ask for Logical or Primary Partitions. Press l for logical.
  It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
  Type the Size: +100M You can Specify either Last cylinder of Size here.
  Press P to verify the partitions lists and remember the partitions name.
  Press w to write on partitions table.
  Either Reboot or use partprobe command.
  Use mkfs -t ext3 /dev/hda?
  Or
  mke2fs -j /dev/hda? ->To create ext3 filesystem.
  vi /etc/fstab
  Write:
  /dev/hda? /data ext3 defaults 0 0
  22. Verify by mounting on current Sessions also:
  30. mount /dev/hda? /data

You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.

• A.When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault: When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
  Restart the System.
  You will get the boot loader GRUB screen.
  Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
  System will boot on Single User mode.
  Use passwd command to change.
  Press ctrl+d
• B.When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault: When System Successfully boot, it will ask for username and password. But you don't know the root's password.
  You will get the boot loader GRUB screen.
  Press a and type 2 or s for single mode ro root=LABEL=/ rhgb queit s
  System will boot on Single User mode.
  Use passwd command to change.
  Press ctrl+d