When configuring Quality of Service (QoS) policies, particularly for traffic going to or from specific IP addresses and involving NAT, it's important to base the rule on how the firewall processes the traffic. For QoS, the firewall evaluates traffic using pre-NAT IP addresses and zones because QoS policies typically need to be applied before the NAT action occurs. This is especially true for inbound traffic, where the goal is to limit bandwidth before the destination IP is translated.
The correct combination for a QoS rule in this scenario, where the aim is to limit bandwidth for downloads from a specific server (implying inbound traffic to the server), would be:
D . Pre-NAT source IP address Pre-NAT source zone:
Pre-NAT source IP address: This refers to the original IP address of the client or source device before any NAT rules are applied. Since QoS policies are evaluated before NAT, using the pre-NAT IP address ensures that the policy applies to the correct traffic.
Pre-NAT source zone: This is the zone associated with the source interface before NAT takes place. Using the pre-NAT zone ensures that the QoS policy is applied to traffic as it enters the firewall, before any translations or routing decisions are made.
By configuring the QoS rule with pre-NAT information, the firewall can accurately apply bandwidth limitations to the intended traffic, ensuring efficient use of network resources and mitigating the impact of large file downloads from the specified server.
For detailed guidelines on configuring QoS policies, refer to the Palo Alto Networks documentation, which provides comprehensive instructions and best practices for managing bandwidth and traffic priorities on the network.

To override a device and network setting applied by a template, you can either configure the setting locally on the firewall or override the setting on the template stack. Configuring the setting locally on the firewall will copy the setting to the local configuration of the device and will no longer be controlled by the template. Overriding the setting on the template stack will apply the setting to all the firewalls that are assigned to the template stack, unless the setting is also overridden locally on a firewall. Changing the setting on the global template will affect all the firewalls that inherit the setting from the template, which is not desirable in this scenario. Configuring a service route for DNS on a different interface will not change the DNS server address, but only the interface that the firewall uses to reach the DNS server. Reference:
Override a Template Setting
How to override panorama pushed template configuration on the local firewall Overriding Panorama Template settings

If the DNS response matches the Original Destination Address in the rule, translate the DNS response using the same translation the rule uses. For example, if the rule translates IP address 1.1.1.10 to 192.168.1.10, the firewall rewrites a DNS response of 1.1.1.10 to 192.168.1.10. https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-admin/networking/nat/source-nat-and-destination-nat/destination-nat-dns-rewrite-use-cases#id0d85db1b-05b9-4956-a467-f71d558263bb

In an active/active high availability (HA) firewall pair, when a firewall experiences a failure of a monitored path, it enters the "Tentative" state1. This state indicates that the firewall is synchronizing sessions and configurations from its peer due to a failure or a change in monitored objects such as a link or path. The firewall in this state is not fully functional but is working towards resuming normal operations by syncing with its peer. Therefore, the correct answer is B. Tentative.