NACE-CIP1-001 試験問題を無料オンラインアクセス

The NACE Inspector should perform tests for soluble salts:

• A.Prior to coating application
• B.After surface preparation
• C.Prior to surface preparation
• D.When specified

Stripe coats are best applied by:

• A.Conventional spray
• B.Airless spray
• C.High volume low pressure spray
• D.Brush

You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:

• A.Advise the Contractor he cannot proceed
• B.Advise the Contractor he can proceed
• C.Advise the Contractor of your readings
• D.Call your supervisor

A successful coating inspector must be able to

• A.advise the coating applicator on how to mix the coating.
• B.recommend the appropriate coating technique for the job to the contractor.
• C.look for problems or issues during application.
• D.apply the coating with expert accuracy.

You have just received your NACE CIP Level 1 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:

• A.Meet with the prospective employer to determine the scope of your role
• B.Review the NACE Attestation prior to making a decision
• C.Accept the assignment without hesitation
• D.Advise the prospective employer that you cannot accept the position