070-336 試験問題を無料オンラインアクセス

You have a Microsoft Office Communications Server 2007 R2 Infrastructure that contains the following components:
One Edge Server
One XMPP Gateway
One Archiving Server
Two Media Gateways
One Monitoring Server
Two Mediation Servers
One Group Chat Server
One Standard Edition Front End Server
You plan to migrate the Infrastructure to Lync Server 2013.
You need to identify the minimum number of Lync Server 2013 Servers required to maintain the
functionality of the existing Infrastructure.
How many Servers should you identify?

• A.3
• B.1
• C.2
• D.4

You plan to deploy a Lync Server 2013 Edge Server Infrastructure.
The Edge Server deployment will be configured as shown in the following table.

You need to configure the DNS Records for Server1 to support the following features:
Automatic Client Sign-In
Discovery of Federated Partners
Which DNS Records should you configure?
To answer, configure the correct Service, Protocol, and Host for each SRV Record in the answer area.
Hot Area:

正解：

Explanation:
Reference: DNS Summary - Single Consolidated Edge with Private IP Addresses Using NAT
http://technet.microsoft.com/en-us/library/gg412787.aspx
DNS Summary -Single Consolidated Edge with Private IP Addresses Using NAT
DNS record requirements for remote access to Lync Server 2013 are fairly straightforward compared to those for certificates and ports. Also, many records are optional, depending on how you configure clients running Lync 2013 and whether you enable federation.
For details about Lync 2013 DNS requirements, see Determine DNS Requirements.
For details about automatic configuration of clients running Lync 2013 if split-brain DNS is not configured, see "Automatic Configuration without Split-Brain DNS" in Determine DNS Requirements.
The following table contains a summary of the DNS records that are required to support the single consolidated edge topology shown in the Single Consolidated Edge Topology figure. Note that certain DNS records are required only for automatic configuration of Lync 2013 and Lync 2010 clients. If you plan to use group policy objects (GPOs) to configure Lync clients, the associated automatic configuration records are not necessary. IMPORTANT: Edge Server Network Adapter Requirements
To avoid routing issues, verify that there are at least two network adapters in your Edge Servers and that the default gateway is set only on the network adapter associated with the external interface. For example, as shown in the Single Consolidated Edge Topology figure in Single Consolidated Edge with Private IP Addresses and NAT, the default gateway would point to the external firewall (10.45.16.1).
You can configure two network adapters in your Edge Server as follows: Network adapter 1 (Internal Interface)
Internal interface with 172.25.33.10 assigned.
No default gateway is defined.
Ensure that there is a route from the network containing the Edge internal interface to any networks that contain servers running Lync Server 2013 or Lync Server 2013 clients (for example, from 172.25.33.0 to 192.168.10.0).
Network adapter 2 (External Interface)
Three private IP addresses are assigned to this network adapter, for example 10.45.16.10 for Access Edge, 10.45.16.20 for Web Conferencing Edge, 10.45.16.30 for AV Edge
Note:
It is possible, though not recommended, to use a single IP address for all three Edge service interfaces. Though this does save IP addresses, it requires different port numbers for each service. The default port number is 443/TCP, which ensures that most remote firewalls will allow the traffic. Changing the port values to (for example) 5061/TCP for the Access Edge, 444/ TCP for the Web Conferencing Edge and 443/TCP for the AV Edge might cause problems for remote users where a firewall that they are behind does not allow the traffic over 5061/TCP and 444/TCP. Additionally, three distinct IP addresses makes troubleshooting easier due to being able to filter on IP address.
Access Edge IP address is primary with default gateway set to integrated router (10.45.16.1).
Web conferencing and A/V Edge IP addresses secondary.
Tip:
Configuring the Edge Server with two network adapters is one of two options. The other option is to use one network adapter for the internal side and three network adapters for the external side of the Edge Server. The main benefit of this option is a distinct network adapter per Edge Server service, and potentially more concise data collection when troubleshooting is necessary DNS Records Required for Single Consolidated Edge with Private IP Addresses Using NAT (Example)

You need to identify which tasks must be performed to move the Central Management Store during the planned migration.
Which three actions should you identify?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange
them in the correct order.
Select and Place:

正解：

Explanation: Lync1 is a Lync 2010 Server - so we DO NOT RUN any commands on Lync1 to move the Central Management Store
Run Install-CsDatabase from one of the 2013 Front-Ends Enable-CsTopology - commonly done on the same Front-End server Move-CsManagementServer - again, target Front-End Pool, commonly done on the same FE.
Topic 3, Litware, Inc Case A
Overview
General Overview
Litware, Inc., is an international manufacturing company that has 4,000 employees. The
company has a sales department, a marketing department, a research department, and a
human resources department.
Litware has a partner company named Fabrikam, Inc. Fabrikam has an office in Paris.
Fabrikam uses a XMPP-based instant messaging (IM) solution.
Physical Locations
Litware has seven offices located throughout North America and Europe.
Litware has two data centers. The data centers are located in New York and London. All
communications for the North American offices are routed through the New York data center.
All communications for the European offices are routed through the London data center.
The number of users in each office is shown in the following table.

Existing Environment
Active Directory Environment
Litware has an Active Directory forest named litwareinc.com.
The forest contains a single domain.
All domain controllers run Windows Server 2008 R2.
Each office contains five domain controllers.
Each office is configured as an Active Directory Site.
Lync Server Environment
Litware has a Lync Server 2010 infrastructure that contains two servers in the New York office.
The servers are configured as shown in the following table.

The SIP domain is litwareinc.com.
Litware has a Microsoft Exchange Server 2013 organization.
Problem Statements
Users in the London office report poor video quality during conferences.
Requirements
Business Goals
Litware wants to minimize the costs associated with purchasing hardware and software.
Planned Changes
Litware plans to migrate the Lync Server 2010 infrastructure to Lync Server 2013.
The migration will have a coexistence period of six months.
Litware plans to implement the following components as part of the planned migration:
Persistent Group Chat
The unified contact store
Enterprise Voice for all users
A central site in each data center
A branch site in each branch office
A Front End pool in each central site
Microsoft Lync Phone Edition devices Pool pairing
Litware plans to create a federation relationship with Fabrikam.
Technical Requirements
Litware identifies the following technical requirements for the planned migration:
Users must be able to use all Lync Server features if a single server fails.
Users must be able to connect to the Lync Server infrastructure if a single central site fails.
Members of a group named Temp_Contractors must be prevented from using
Microsoft Lync 2013 when they connect remotely.
Only users in the human resources department must be able to access and
discover a persistent chat room named HRConfidential.
Security Requirements
Litware plans to deploy remote access.
Some users work remotely from their customers offices, which have firewall restrictions.
All of the remote users must be able to connect to the Lync Server infrastructure by using TCP port 443.

You need to recommend which tasks must be performed to implement the planned Unified Contact Store.
Which three actions should you recommend?
(Each correct answer presents part of the solution. Choose three.)

• A.From a server that has Lync Server 2013 deployed, run the New-CsPartnerApplication cmdlet.
• B.From a server that has Lync Server 2013 deployed, run the Set-CsUserServicesPolicy cmdlet.
• C.From a server that has Exchange Server 2013 deployed, run the ExchUCUtil.ps1 script.
• D.From a server that has Exchange Server 2013 deployed, run the Configure EnterprisePartnerApplication.ps1 script.
• E.From a server that has Lync Server 2013 deployed, run the Set-CsClientPolicy cmdlet.

You have a Lync Server 2013 Infrastructure.
Your Company has a Sales Department and a Research Department.
You deploy Persistent Chat.
You need to configure Persistent Chat to meet the following requirements:
Users in the Sales Department must be prevented from viewing the names of the Rooms used by the Research Department.
Users in the Research Department must be able to Discover all of the Rooms used by their
Department.
What should you do?

• A.Create a User-Level Persistent Chat Policy named Sales.
  Apply the Sales Policy to the Sales and Research Users.
  Create Persistent Chat Rooms for each Department and set the Privacy to Secret.
• B.Create a User-Level Persistent Chat Policy named Sales.
  Apply the Sales Policy to the Sales and Research Users.
  Create Persistent Chat Rooms for each Department and set the privacy to Open.
• C.Create a Category named ResearchRooms.
  Add the Research Users as Allowed Members to the ResearchRooms Category.
  Add the Sales Users as Denied Members to the ResearchRooms Category.
  Create Persistent Chat Rooms for each Department and set the Privacy to Secret.
• D.Create a Category named ResearchRooms.
  Add the Research Users as Allowed Members to the ResearchRooms Category.
  Add the Sales Users as Denied Members to the ResearchRooms Category.
  Create Persistent Chat Rooms for each Department and set the privacy to Closed.