JN0-696 試験問題を無料オンラインアクセス

試験コード:JN0-696
試験名称:Security Support, Professional (JNCSP-SEC)
認定資格:Juniper
無料問題数:36
更新日:2026-08-25
評価
100%

問題 1

-- Exhibit -

-- Exhibit -
Click the Exhibit button.
There is an existing chassis cluster connected to the corporate network 192.168.1.0/24. You are asked to connect another department to this VLAN. To achieve this, you add a new chassis cluster to the network. After connecting to the network, the cluster experiences traffic problems. You have verified that the addresses and VLAN IDs are configured correctly.
Referring to the exhibit, which configuration would resolve this problem?

問題 2

You want to allow remote users using PCs running Windows 7 to access the network using an IPsec VPN. You implement a route-based hub-and-spoke VPN; however, users report that they are not able to access the network.
What is causing this problem?

問題 3

-- Exhibit -user@SRX-1> show configuration security ike traceoptions {
file ike-trace;
flag all; } policy juniper {
proposal-set standard;
pre-shared-key ascii-text "$ $ znCO hKMXtuMX - gTz "; ## SECRET-DATA } gateway juniper {
ike-policy juniper; address 192.168.1.11; external-interface fe-0/0/7;
} user@SRX-1> show configuration security ipsec traceoptions {
flag all; } policy juniper {
proposal-set standard; } vpn juniper {
bind-interface st0.0; ike { gateway juniper; ipsec-policy juniper; }
}
user@SRX-1> show security ike security-associations
user@SRX-1> show security ipsec security-associations Total active tunnels: 0
user@SRX-1> show log ike-trace
...
Jun 13 16:21:33 ike_st_o_all_done: MESSAGE: Phase 1 { 0x3f669946 90eba0c7 - 0x76bdffab f8770040 } / 00000000, version = 1.0, xchg = Identity protect, auth_method = Pre shared keys, Responder, cipher = 3des-cbc, hash = sha1, prf = hmac-sha1, life = 0 kB / 28800 sec, key l Jun 13 16:21:33 192.168.1.10:500 (Responder) -> 192.168.1.11:500 { 3f669946 90eba0c7 76bdffab f8770040 [-1] / 0x00000000 } IP; MESSAGE: Phase 1 version = 1.0, auth_method = Pre shared keys, cipher = 3des-cbc, hash = sha1, prf = hmac-sha1, life = 0 kB / 28800 sec, key
Jun 13 16:21:33 ike_encode_packet: Start, SA = { 0x3f669946 90eba0c7 - 76bdffab f8770040 } / 00000000, nego = -1
Jun 13 16:21:33 ike_send_packet: Start, send SA = { 3f669946 90eba0c7 - 76bdffab f8770040}, nego = -1, dst = 192.168.1.11:500, routing table id = 0
Jun 13 16:21:33 ike_send_notify: Connected, SA = { 3f669946 90eba0c7 - 76bdffab f8770040}, nego = -1
Jun 13 16:21:33 iked_pm_ike_sa_done: local:192.168.1.10, remote:192.168.1.11 IKEv1
Jun 13 16:21:33 iked_pm_id_validate id NOT matched.
Jun 13 16:21:33 P1 SA 3075313 timer expiry. ref cnt 1, timer reason Defer delete timer expired (3), flags 0x331.
Jun 13 16:21:33 iked_pm_ike_sa_delete_notify_done_cB. For p1 sa index 3075313, ref cnt 1, status: Error ok
Jun 13 16:21:33 ike_expire_callback: Start, expire SA = { 3f669946 90eba0c7 - 76bdffab f8770040}, nego = -1
Jun 13 16:21:33 ike_alloc_negotiation: Start, SA = { 3f669946 90eba0c7 - 76bdffab f8770040}
...
-- Exhibit -
Click the Exhibit button.
You are troubleshooting a new IPsec VPN that is not establishing between SRX-1 and a remote end device.
Referring to the exhibit, what is causing the problem?

問題 4

-- Exhibit -user@host> show log flow.log Jun 12 20:00:45 host clear-log[ ]: logfile cleared Jun 12 20:01:10 20:01:10.412643:CID-0:RT:172.23.1.20/2526->10.3.202.56/443;6> matched filter
to_https: ...
Jun 12 20:01:10 20:01:10.412643:CID-0:RT: fe-0/0/6.0:172.23.1.20/2526->10.3.202.56/443, tcp, flag 2 syn
...
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:check self-traffic on fe-0/0/6.0, in_tunnel 0x0
...
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:flow_first_rule_dst_xlate: DST xlate: 10.3.202.56(443) to 10.25.0.3(443), rule/pool id 2/2.
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:flow_first_routing: vr_id 0, call flow_route_lookup(): src_ip 172.23.1.20, x_dst_ip 10.25.0.3, in ifp fe-0/0/6.0, out ifp N/A sp 2526, dp 443, ip_proto 6, tos 0
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:Doing DESTINATION addr route-lookup
Jun 12 20:01:10 20:01:10.412643:CID-0:RT: routed (x_dst_ip 10.25.0.3) from managed (fe0/0/6.0 in 0) to ge-0/0/1.4093, Next-hop: 10.25.0.3
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:flow_first_policy_search: policy search from zone managed-> zone trust (0x110,0x9de01bb,0x1bb)
Jun 12 20:01:10 20:01:10.412643:CID-0:RT: app 58, timeout 1800s, curr ageout 20s
Jun 12 20:01:10 20:01:10.412643:CID-0:RT: permitted by policy default-policy-00(2)
...
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:flow_xlate_pak
Jun 12 20:01:10 20:01:10.412643:CID-0:RT: post addr xlation: 172.23.1.20->10.25.0.3.
Jun 12 20:01:10 20:01:10.412643:CID-0:RT: post addr xlation: 172.23.1.20->10.25.0.3.
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:skip pre-frag: is_tunnel_if- 0, is_if_mtu_configured- 0
Jun 12 20:01:10 20:01:10.412643:CID-0:RT:mbuf 0x42344180, exit nh 0xb00010
Jun 12 20:01:10 20:01:10.412643:CID-0:RT: ----- flow_process_pkt rc 0x0 (fp rc 0)
-- Exhibit -
Click the Exhibit button.
You want to allow Web-based management of your SRX Series device through fe-0/0/6.0. This interface belongs to the managed zone with an IP address of 10.3.202.56. You are unable to open an HTTPS connection and have enabled traceoptions to troubleshoot the problem.
Referring to the exhibit, what is causing this problem?

問題 5

-- Exhibit -user@host> show security flow session interface ge-0/0/10.0 Session ID. 29, Policy name: to-infrastructure/4, Timeout: 1250, Valid Resource information : FTP ALG, 1, 0
In: 10.1.1.213/61892 --> 10.2.2.20/21;tcp, If: ge-0/0/8.0, Pkts: 25, Bytes: 1242 Out: 10.2.2.20/21 --> 10.1.1.213/61892;tcp, If: ge-0/0/10.0, Pkts: 18, Bytes: 1278 Total sessions: 1
user@host> show interfaces ge-0/0/10 | match zone Security: Zone: infrastructure
user@host> show interfaces ge-0/0/8 | match zone Security: Zone: finance
user@host> show configuration security policies from-zone infrastructure to-zone finance
user@host> show log flow-traceoptions Jun 13 14:44:01 14:44:01.059151:CID-0:RT:SPU received an event,type 112, common:3
Jun 13 14:44:01 14:44:01.059151:CID-0:RT:Rcv packet with rtbl idx 0, cos 0
Jun 13 14:44:01 14:44:01.059151:CID-0:RT:SPU processing spu_flushed_pak, flag: 0x2, mbuf:0x423f6100
Jun 13 14:44:01 14:44:01.060343:CID-0:RT:10.2.2.20/20->10.1.1.213/64313;6> matched filter filter2:
Jun 13 14:44:01 14:44:01.060473:CID-0:RT:packet [64] ipid = 1614, @423fd19c
Jun 13 14:44:01 14:44:01.060473:CID-0:RT:---- flow_process_pkt: (thd 3): flow_ctxt type 15, common flag 0x0, mbuf 0x423fcf80, rtbl_idx = 0
Jun 13 14:44:01 14:44:01.060473:CID-0:RT: flow process pak fast ifl 71 in_ifp ge-0/0/10.0
Jun 13 14:44:01 14:44:01.060473:CID-0:RT: ge-0/0/10.0:10.2.2.20/20->10.1.1.213/64313, tcp, flag 2 syn
Jun 13 14:44:01 14:44:01.060473:CID-0:RT: find flow: table 0x49175b08, hash 34391(0xffff), sa 10.2.2.20, da 10.1.1.213, sp 20, dp 64313, proto 6, tok 8
Jun 13 14:44:01 14:44:01.060473:CID-0:RT: no session found, start first path. in_tunnel - 0, from_cp_flag - 0
Jun 13 14:44:01 14:44:01.060473:CID-0:RT: flow_first_create_session
Jun 13 14:44:01 14:44:01.060473:CID-0:RT:-jsf : preset sess plugin info for session 31 Jun 13 14:44:01 14:44:01.060473:CID-0:RT: Allocating plugin info block for plugin(21)
Jun 13 14:44:01 14:44:01.060473:CID-0:RT:[JSF] set ext handle 0x46389be8 for plugin 21 on session 31
Jun 13 14:44:01 14:44:01.060473:CID-0:RT:asl_usp_get_l3_out_ifp_out_tunnel ASL IPV4 out_ifp = ge-0/0/8.0 for dst:10.1.1.213 in vr_id:0
Jun 13 14:44:01 14:44:01.060473:CID-0:RT:SPU invalid session id 00000000
Jun 13 14:44:01 14:44:01.060473:CID-0:RT: jsf drop pak pid 21, jbuf 0x4fcd7038, release hold 0, sess_id 0
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: After jsf gate hit. sid 0xfb39, pid 0, cookie 0x1f, jbuf 0x15. rc = 1
Jun 13 14:44:01 14:44:01.060761:CID-0:RT:RM populated xlate info for nsp2: 10.1.1.213/64313>10.2.2.20/20out_ifp = ge-0/0/8.0, out_tunnel = 0x0
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_in_dst_nat: in 0/10.0>, out 0/8.0> dst_adr 10.1.1.213, sp 20, dp 64313
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_in_dst_nat: bypassed by RM
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_rule_dst_xlate: bypassed by RM
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_routing: bypassed by RM
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_policy_search: bypassed by RM Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_reverse_mip: bypassed by RM
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_src_xlate: bypassed by RM
Jun 13 14:44:01 14:44:01.060761:CID-0:RT: flow_first_get_out_ifp: bypassed by RM
Jun 13 14:44:01 14:44:01.060761:CID-0:RT:is_loop_pak: No loop: on ifp: ge-0/0/8.0, addr: 10.1.1.213, rtt_idx:0
Jun 13 14:44:01 14:44:01.060761:CID-0:RT:[JSF]Normal interest check. regd plugins 18, enabled impl mask 0x0
Jun 13 14:44:01 14:44:01.060761:CID-0:RT:-jsf int check: plugin id 2, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060761:CID-0:RT:-jsf int check: plugin id 3, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060761:CID-0:RT:-jsf int check: plugin id 5, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060761:CID-0:RT:-jsf int check: plugin id 6, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 7, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 8, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 14, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:+++++++++++jsf_test_plugin_data_evh: 3
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 15, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 21, svc_req 0x0, impl mask 0x0. rc 3
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 22, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 25, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 26, svc_req 0x0, impl mask 0x0. rc 2
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf int check: plugin id 27, svc_req 0x0, impl mask 0x0. rc 4
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:[JSF]Plugins(0x0, count 0) enabled for session = 4294967296, impli mask(0x0), post_nat cnt 31 svc req(0x0)
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:[JSF]c2s order list:
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: 21 Jun 13 14:44:01 14:44:01.060975:CID-0:RT:[JSF]s2c order list:
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: 21
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: service lookup identified service 79.
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: flow_first_final_check: in 0/10.0>, out 0/8.0>
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:flow_first_complete_session, pak_ptr: 0x48ae5ba0, nsp: 0x4c38e248, in_tunnel: 0x0
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:construct v4 vector for nsp2
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: existing vector list 82-454e5c90.
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: Session (id:31) created for first pak 82
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: flow_first_install_session======> 0x4c38e248
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: nsp 0x4c38e248, nsp2 0x4c38e2c8
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: make_nsp_ready_no_resolve()
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: route lookup: dest-ip 10.2.2.20 orig ifp ge-0/0/10.0 output_ifp ge-0/0/10.0 orig-zone 8 out-zone 8 vsd 0
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: route to 10.2.2.20 Jun 13 14:44:01 14:44:01.060975:CID-0:RT:Doing jsf sess create notify
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:flow_delete_gate: invoked for gate 0x4c077c24 [id 1000003]
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:gate_start_ageout: ageout started for gate 0x4c077c24
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: jsf sess id ignore. sess 31, pid 21, dir 1, st_buf 0x0.
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: jsf sess id ignore. sess 31, pid 21, dir 2, st_buf 0x0.
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:All plugins have ignored session :31
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: existing vector list 2-454ecbd0.
Jun 13 14:44:01 14:44:01.060975:CID-0:RT: existing vector list 2-454ecbd0.
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:-jsf create notify: plugin id 21. rc 3
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:flow_do_jsf_notify_session_creation(): natp(0x4c38e248): 0 SHORT_CIRCUITED. 0x00000000.
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:no need update ha
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:Installing c2s NP session wing
Jun 13 14:44:01 14:44:01.060975:CID-0:RT:Installing s2c NP session wing Jun 13 14:44:01 14:44:01.061475:CID-0:RT: flow got session.
Jun 13 14:44:01 14:44:01.061475:CID-0:RT: flow session id 31
Jun 13 14:44:01 14:44:01.061475:CID-0:RT: vector bits 0x2 vector 0x454ecbd0
Jun 13 14:44:01 14:44:01.061475:CID-0:RT: tcp flags 0x2, flag 0x2
Jun 13 14:44:01 14:44:01.061475:CID-0:RT: Got syn, 10.2.2.20(20)->10.1.1.213(64313), nspflag 0x1021, 0x20
Jun 13 14:44:01 14:44:01.061475:CID-0:RT:mbuf 0x423fcf80, exit nh 0xa0010
Jun 13 14:44:01 14:44:01.061475:CID-0:RT: ----- flow_process_pkt rc 0x0 (fp rc 0)
-- Exhibit -
Click the Exhibit button.
While troubleshooting a device, you see that it is permitting packets for which it appears there is no policy.
Using the information in the exhibit, what is causing this behavior?

コメントを追加

あなたのメールアドレスが公開されることはありません。個人情報に関する内容は隠されます *

insert code
画面にある文字を入力してください。