H13-629 試験問題を無料オンラインアクセス

In adisaster recovery plan design, RTO and RPO are the most basic standards. For example, you need to start recovery within half a day after a disaster and the RTO value is twelve hours.

• A.True
• B.False

An Engineer installed a OceanStor 9000 for a customer (a total of 5 OceanStor 9000 C Node, front and rear ends are 10GE TOE networking, on-site installation TOE network card). Then connected the signal lines, power lines, and debugged the software. During the installation there were issues. Which of the following description of these issues are correct? (Multiple choice.)

• A.CE6850 switch connected to two stacked copper cables, one of which is needed to post-cold more cold, because it does not affect the network interoperability. You can base this software debugging.
• B.Label NODE 01 A0-0 The signal cable is inserted in the network port A0-1. The signal cable labeled NODE01 B3-1 is inserted in the network positionB3-0, due to the same network card two network port peer, you can place the wrong line, you cannot adjust.
• C.The signal cables are long and need to be strapped to the cabinet or placed on the bottom tray.
• D.5 devices TOE NIC A0, B1, and A0, B3 inserted into the PCIe slot will not affect the system.
  Deployment will not affect the network bandwidth, so it cannot be adjusted.

How can you view the WWN HBA card that is in a Windows2008 R2 system?

• A.In Device Manager, right-click of the HBA card to see its properties
• B.View in Storage Explorer Manager
• C.View using the FC Info tool
• D.CMD command line, enter the diskpart

Which of the following are the basic principles of storagetroubleshooting? (multiple choice)

• A.First perform an alarm analysis, then use the replacement method
• B.Find the common first alarm, after the individual alarm
• C.First find the high-level alarm, then the low-level alarm
• D.Locate the exterior first, then the interior

When Replication Director creates a protection group to protect LUNs, you can see that there is no LUN on the interface. Which of the following may be the cause?

• A.There is a problem with the remotereplication configuration.
• B.There is a problem with the storage initiator configuration.
• C.There is a problem with the storage LUN configuration.
• D.There is a problem with the RD software configuration.