HPE7-A01 試験問題を無料オンラインアクセス

Your customer currently has two (2) 5406 modular switches with MSTP configured as their core switches.
You are proposing a new solution. What would you explain regarding the AOS-CX VSX switch pair when the Spanning-tree needs to be set up?

• A.Enable vsx-sync stp-global in vsx mode to sync the configuration.
• B.Spanning-tree configuration is synced by default with VSX.
• C.Enable vsx-peer stp-global in vsx mode to sync the configuration.
• D.Use vsx-sync in the MSTP region configuration to get synced.

A company recently upgraded its campus switching infrastructure with Aruba 6300 CX switches. They have implemented 802.1X authentication on edge ports where laptop and loT devices typically connect An administrator has noticed that for PoE devices the pons are delivering the maximum wattage instead of what the device actually needs Upon connecting the loT devices, the devices request their specific required wattage through information exchange

• A.Concerned about this waste of electricity, what should the administrator implement to solve this problem?
• B.Enable AAA authentication to exempt LLDP and/or CDP information
• C.Create device profiles with the correct power definitions.
• D.implement a classifier policy with the correct power definitions.
• E.Globally enable the QoS trust setting for LLDP and/or CDP

Which statements are true about VSX LAG? (Select two.)

• A.The total number of configured links may not exceed 8 for the pair or 4 per switch
• B.Outgoing traffic is switched to a port based on a hashing algorithm which may be either switch in the pair
• C.Up to 255 VSX lags can be configured on all 83xx and 84xx model switches.
• D.LAG traffic is passed over VSX ISL links only while upgrading firmware on the switch pair
• E.Outgoing traffic is preferentially switched to local members of the LAG.

A company with 10,281 employees recently deployed new HPE Aruba Networking Access Points at different branch offices. Wireless 802.IX authentication will be against a RADIUS server in the cloud. The security team is concerned that the traffic between the AP and the RADIUS server will be exposed.
What is the appropriate solution for this scenario?

• A.Enable IPSec under Data Handling in HPE Aruba Networking Central
• B.Enable EAP-TLS on all wireless devices. Enable EAP-TTLS on all wireless devices.
• C.Configure RedSec on the AP and the RADIUS server.

Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where servers attach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the VSX switches.

What is correct about access from the servers to the Core? (Select two.)

• A.Server 1 and Server 2 can communicate with each other via the core layer
• B.Server 1 can access the core layer via both uplinks
• C.Server 1 can access the core layer via the keepalrve link
• D.Server 1 can access the core layer on only one uplink
• E.Server 2 cannot access the core layer.
• F.Server 2 can access the core layer via the keepalive link