HPE6-A44 試験問題を無料オンラインアクセス

An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When
re-provisioning the RAP, the administrator must enter a user's credentials. What is the purpose of these
credentials?

• A.to authenticate users on wired and wireless ports
• B.to authenticate the RAP device
• C.to authenticate users on wired ports
• D.to authenticate users on wireless ports

An administrator configures the MultiZone feature for a company network, where a mobility cluster is the
primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The
administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in
the primary zone. When the APs boot up and establish connections to both zones, the administrator notices
that no data connections are established to the data zone.
What must the administrator do to fix this problem?

• A.Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in
  the data zone.
• B.Have the MultiZone APs initially boot from the standalone controller in the data zone.
• C.Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate
  the MultiZone APs to both groups.
• D.Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone
  APs to both groups.

An administrator configures a port on a RAP through the association of an AAA profile with 802.1X
authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The
administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic.
But, when users connect with their wired desktops, they are assigned an initial role and routed to a Captive
Portal page.
What must the administrator do to enable desktop usage based on the user's role assignment?

• A.Apply a server-derived role policy to the RAP port.
• B.Map the RAP port to an authentication profile.
• C.Implement ACLs on the RAP port.
• D.Identify the RAP port as untrusted.

Refer to the exhibit.

An administrator configures a split-tunnel policy to be used by RAPs at branch offices. Under the
Configuration section on the Mobility master (MM) shown in the exhibit, where should the administrator
configure the split-tunnel mode so that it can be deployed to the RAPs?

• A.Services
• B.Access Points
• C.WLAN
• D.Roles & Policies

An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP
traps from managed devices, but no alerts are generated on the AMP for certain critical traps.
Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a
critical SNMP trap from an Aruba Mobility Controller (MC)?

• A.Alert rule
• B.SNMP trap rule
• C.Trigger rule
• D.AMON rule