HPE2-Z39 試験問題を無料オンラインアクセス

What is a best practice for an MSTP region?

• A.A switch should have a consistent spanning tree priority in each MSTP instance
• B.Switch-to-switch links should carry all VLANs in use in the MSTP region.
• C.The desired root for the CIST should have a lower config revision than any other switch.
• D.The config name should contain the hostname of the root switch.

Currently the routing switches shown in the exhibit have only connected IP routes. The network administrator needs to add static routes to support communications between subnet 10.1.4.0/24 and subnet 10.1.8.0/24. Which switch or switches require a static route to 10.1.8.0/24?

• A.Switch-1 and Switch-2
• B.Switch-3 only
• C.Switch-1 only
• D.Switch-1 and Switch-3

An ArubaOS switch operates at factory defaults and has a reachable IP address. How can network administrators access the switch CLI ?

• A.from the console port without authentication or from Telnet without authentication
• B.from the console port without authentication, but not from Telnet at all
• C.from the console port with the default username and password, but not from Telnet at al
• D.from the console port without authentication or from Telnet with the default username and password

All switches are ArubaOS switches that currently have the default spanning tree priority.
Switch-1 should be the root of the spanning tree If Switch-1 fails. Switch-2 should become root.
Which configuration for spanning tree priorities ensures this behavior?

• A.priority 0 on Switch-1 and priority 15 on Switch-2
• B.priority 15 on Switch-1 and priority 14 on Switch-2
• C.priority 15 on Switch-1 and priority 9 on Switch-2
• D.priority 0 on Switch-1 and priority 1 on Switch-2

What is the purpose of the organization string that is set in the System > Admin settings of an Aruba Instant UI?

• A.It configures the SNMP credentials that Aruba AirWave uses to discover the cluster
• B.It prevents unauthorized APs. which do not have the correct organization string, from joining the cluster.
• C.It defines the group and folder to which the Instant cluster should be assigned in Aruba AirWave.
• D.It directs the cluster to the proper Aruba Activate account for Zero Touch Provisioning (ZTP).