HPE0-J58 試験問題を無料オンラインアクセス

Refer to the exhibit.

A customer asks you to design an HPE 3PAR 9450 solution with 64 3 84 TB SSDs using RAID 6 (6+2). The customer does not want to lose data It an entire drive enclosure Is lost
What must be added to the Bill of Materials shown to meet these requirements?

• A.8 HPE External 2.0m(6ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
• B.1 HPE 3PAR StoreServ RPS Service Processor
• C.4 HPE 3PAR 9000 24-disK 2U SFF (2 5ln) SAS Drive Enclosure
• D.1 HPE 3PAR Policy Manager Software E-LTU

You are developing reports for a new proposal. You try to use SAF Analyze to upload the customer data you collected, but you receive an error.
What must you do first to begin the process?

• A.Create a gatekeeper on the SAF utility server
• B.Export me data as xml.
• C.Create a new opportunity.
• D.Create a single .zip file of all data exports

A customer deployed an HPE 3PAR 8200 and an HPE 3PAR 8400 array Peer persistence is configured between them All remote copy links are lost, Out connection to the Quorum witness is maintained by Doth arrays.
Immediately after the remote copy links are restored, the customer reports they cannot perform a manual switchover for maintenance in SSMC
What is causing this issue'

• A.Manual switchover is not supported between arrays of different models
• B.A manual switchover cannot be performed until the volumes are resynced.
• C.Manual switchover cannot be performed if the arrays are running different firmware versions
• D.Peer Persistence is designed for Automatic Transparent Failover and must be disabled to perform a manual switchover.

A customer established a remote site with an HPE 3PAR 2O0O0 array and wants to implement Remote Copy tor data protection
The environment has these specifications
* Two locations of arrays are less than 1 km apart
* The locations are limited to an existing shared link that cannot be upgraded
* Data only changes on a weekly basis, but needs to be available if the primary site fails.
Based on this information. which type of replication mode meets all these needs?

• A.Synchronous
• B.Asynchronous Streaming
• C.Synchronous Long Distance
• D.Asynchronous Periodic

You have chosen to utilize HPE 3PAR synchronous replication in order to meet the customer stated
requirement of RPO=0. What is a key consideration you need to explain to the customer?

• A.Host write latencies will decrease
• B.Host write latencies will increase
• C.RC sync can only be deployed over FC links
• D.Host writes can be committed to either primary or backup storage before host acknowledgment