HP0-S39 試験問題を無料オンラインアクセス

Given the configuration shown in the graphic, what will happen if an uplink from the Virtual Connect FlexFabric module to the data center switch fails, and SrnartLink is enabled on vNET-1 and vNET-2?

• A.All traffic will be blocked until the uplink problem is resolved
• B.The uplink failure will be reported to the server blade
• C.Traffic will alternate until the uplink problem is resolved
• D.Virtual connect will route traffic by using interslot stacking links

An HP BladeSystem C7000 enclosure has Virtual Connect FlexFabric modules with FlexNIC adapters.
A server profile has the following custom bandwidth settings:
-Network1: 4 Gb -Network2: 8 Gb -Network3: 10 Gb -Network4: Auto
What is the effective minimum bandwidth of Network4?

• A.2 GB
• B.10 GB
• C.4 GB
• D.8 GB

An HP BladeSystem c7000 enclosure has Virtual Connect FlexFabric modules. Port 1 of the module was configured with a Fibre Channel SFP transceiver, but the Fibre Channel transceiver has been replaced with an Ethernet transceiver, and cabled to a network switch.
What step must be taken to use the Ethernet transceiver?

• A.The connected server blade must be restarted.
• B.The port must be reconfigured.
• C.The SFP transceiver must be configured for Ethernet traffic.
• D.The module must be restarted.

A customer has Virtual Connect FlexFabric modules in their data center. They need to replace the OM2 fiber cables for better bandwidth, but are concerned about cost. The cables need to support 10 Gigabit Ethernet up to 300 meters across the building backbone.
What should they choose to replace their cables?

• A.Bend-insensitive multimode fiber (BIMMF) cables
• B.OM3 multi-mode fiber cables
• C.OM4 fiber cables
• D.Laser-optimized multi-mode fiber (LOMMF) cables

A customer has an HP BladeSystem C7000 enclosure and plans to install two Virtual Connect FlexFabric modules. All server blades will use Type A mezzanine cards.
Which interconnect bays should the customer use for the Virtual Connect modules?

• A.3 and 4
• B.4 and 5
• C.4 and 6
• D.3 and 5