GB0-341-ENU 試験問題を無料オンラインアクセス

When using the PEAP or EAP-TLS wireless authentication method, we need to use which command to enable it globally, and load the root certificate and server certificate as needed.

• A.dot1x authentication-method chap
• B.dot1x authentication-method peap
• C.dot1x authentication-method eap
• D.dot1x authentication-method pap

Which of the following statements about H3C wireless controller license registration is correct? (Multiple choice)

• A.The applied Active Key has a binding relationship with the relevant device, and this Active Key can only be used on this device (the relevant information of this device is provided at the time of application)
• B.When applying for the Active Key of the wireless controller, you need to provide the relevant information of the device (device serial number, verification code) and the license key.
• C.The license key of the H3C wireless controller is an authorized serial number, such as 173995EA490E3C14A9A66
• D.There is no binding relationship between the applied Active Key and related equipment. This Active Key can be used on any equipment of the same model.

In wireless authentication, if the 802.1x authentication method is used, the EAP method that is not included is?

• A.EAP-TLS
• B.PEAP
• C.EAP-MD5

For coverage planning for areas with a large radius and few concurrent users, which of the following statement is correct? (Multiple choice)

• A.deployed in such a multi-area AP, need to consider the AP divided between the channels, AP used between poor channel deployment with less interference, for example, when deploying three APs, the channels of AP1, AP2, and AP3 can be set to 1, 6 and 11 respectively
• B.Such areas can be covered by low-power APs respectively, and the coverage method can be based on the coverage of areas with small radius and few users. It is necessary to pay attention to the isolation of each AP frequency point during coverage.
• C.This type of area can be covered by an indoor distributed system, using the sky of the original wireless network (such as PHS, CDMA, etc.) The feeder system combines WLAN systems to achieve the effect of one AP covering a larger area.
• D.This type of area is the main WLAN indoor application place, such as comprehensive function area, hotel guest room, etc., this type of area can be divided into small areas according to rooms, walls, columns, etc., as a combination of multiple small radius and fewer users

In wireless network survey and design, when covering floors and areas with business needs, the received signal strength of more than 95% of the target coverage area should be greater than or equal to ______. The signal strength of the key coverage area should be greater than or equal to _______.

• A.-90dBm ； -85dBm
• B.-85dBm ； -80dBm
• C.-80dBm ； -75dBm
• D.-75dBm ； -70dBm