201 試験問題を無料オンラインアクセス

A BIG-IP device is configured with both an internal external and two Corporate VLANs. The virtual server has SNAT enabled and is set to listen on all VLANs Auto Last Hop is disabled. The Corporate users are on
10.0.0.0./24 and 172.16.0.0/12. The BIG-IP has a Self-IP on the 1.0.0.0.0./24 subnet.
Internet users are able to access the virtual server. Only some of the Corporate users are able to connect to the virtual server A BIG-IP Administrator performs a tcpdump on the BIG-IP and verifies that traffic is arriving from users in 10.0.0.0/24.
What should the BIG-IP Administrator do to correct this behaviour?

• A.Modify the default route of the servers to point to the BIG-IP device
• B.Add a static route for the 172.16.0.0/12 subnet
• C.Change the default route to point to the extra firewall
• D.Disable the server on the internal VLAN

A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it:
when CLIENT_ACCEPTED { if {[TCP::local_port] equals 21 } { pool
ftppool } elseif {[TCP::local_port] equals 23 } { pool telnetpool }
If a user connects to 10.10.1.100 and port 22, which pool will receive the request?

• A.None. The request will be dropped.
• B.Unknown. The pool cannot be determined from the information provided.
• C.telnetpool
• D.ftppool

A local user account (Users) on the BIG-IP device is assigned the User Manager role. Userl attempts to modify the properties of another account (User2), but the action fails. The BIG-IP Administrator can successfully modify the User2 account.
Assuming the principle of least privilege, what is the correct way to allow User 1 to modify User2 properties?

• A.Modify the partition access for User 1
• B.Move User to the same partition as User2.
• C.Move User2 to the same partition as User1
• D.Grant User1 administrative privileges

A Standard Virtual Server configured for an application reports poor network performance. This application is accessed mainly from computers on the Internet.
What should the BIG-IP Administrator configure on the Virtual Server to achieve better network performance?

• A.Protocol Profile (Client) with f5-tcp-optimized
• B.Protocol Profile (Client) with f5-tcp-wan and Protocol Profile (Server) with f5-tcp-lan
• C.Protocol Profile (Client) with fS-tcp-lan and Protocol Profile (Server) with f5-tcp-wan
• D.Protocol Profile (Client) with f5-tcp-lan

When configuring a pool member's monitor, which three association options are available? (Choose three.)

• A.do not assign any monitor to the specific member
• B.assign a monitor to the specific member
• C.configure a default monitor
• D.inherit the pool's monitor
• E.inherit the node's monitor