DCAPE-100 試験問題を無料オンラインアクセス

A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. The technician also creates a global hot spare.
A drive fails on the second virtual disk.
What is the result?

• A.The dedicated hot spare for the virtual disk replaces the failed drive.
• B.A copyback operation occurs between the failed drive and the global hot spare.
• C.The global hot spare replaces the failed drive.
• D.A copyback operation occurs between the failed drive and the dedicated hot spare.

A technician builds a bootable ISO with Repository Manager, and then mounts the ISO via the iDRAC virtual console. After the updates have completed, the technician reboots the server to apply the updates. When reviewing the updates, the technician determines NOT all updates were applied.
What is causing this issue?

• A.A SUU repository must be used to update the firmware instead of the bootable ISO.
• B.The iDRAC update caused virtual media disconnect.
• C.The firmware must be manually updated from the iDRAC.
• D.An OS was NOT installed prior to upgrading the firmware.

A technician needs to remotely update the iDRAC with Lifecycle Controller firmware.
Which three steps should the technician take to complete the update? (Choose three.)

• A.Connect to the iDRAC GUI
• B.Locate the latest iDRAC firmware and download to management station
• C.Go to Summary Page and reset the iDRAC
• D.Go to the Firmware Update page and upload the iDRAC firmware.
• E.After firmware update completes, restart server
• F.Boot the server into F10 to start the firmware update

Which operation should a technician perform to ensure configuration recovery if a server must be physically replaced?

• A.View and export the current hardware inventory
• B.Back up the Server Profile to vFlash
• C.Create and export a Server Configuration Profile
• D.Back up and export the Server Profile to a network share

A systemboard was replaced. After the replacement, the system will NOT boot into Windows and gives the error 'No boot device found'. Virtual disks are seen and optimal.
What action should a technician take to resolve this issue?

• A.Reseat the RAID chain
• B.Make sure that the iDRAC license was imported
• C.Insert the Windows media to fix the MBR
• D.Change the boot settings from BIOS to UEFI