Explanation:
correct answer is "Overclocking" and "Reduce CPU Clock speed" CPU is at 4.5 Ghz when normal is 3.2 Ghz.
Overclocking too much can cause freezes, and this is a gaming computer so the user probably took it too far.
http://blog.logicalincrements.com/2018/12/4-troubleshooting-tips-overclocking-pc/

A captive portal is a web page that requires users to agree to terms and conditions, enter credentials, or provide payment information before accessing a wireless network. Some devices, such as streaming media devices, may not have a web browser or a user interface to interact with the captive portal. One possible solution is to connect to the hotspot on the user's device, such as a smartphone or a tablet, and use it as a bridge to access the internet through the wireless network. The user's device can authenticate with the captive portal and share its internet connection with other devices via Wi-Fi, Bluetooth, or USB. Reference:
https://partners.comptia.org/docs/default-source/resources/a-core-1-content-guide (page 12)

three beeps and a black screen indicate a memory error of some sort123. This means that the RAM may not be properly installed or connected to the motherboard. Reseating the RAM means removing each stick and re-inserting it, making sure it clicks into place. This can sometimes solve the problem by ensuring a good contact between the RAM and the motherboard.
Replacing the power supply, reattaching the hard drive, or flashing the BIOS are unlikely to fix this issue, since they are not related to the memory error. The power supply provides power to the whole system, the hard drive stores data, and the BIOS is the firmware that controls the boot process. None of these components would cause three beeps and a black screen if they were faulty.

Ac stands for 802.11ac, which is a wireless networking standard that operates in the 5 GHz frequency band and offers a maximum data rate of 1.3 Gbps. 802.11ac is also backward compatible with 802.11a, 802.11b,
802.11g, and 802.11n standards. If a technician wants to install a WAP (wireless access point) in the company break room that has a rating of higher than 50 Mbps and minimal range to avoid interference with other access points, they should select the 802.11ac standard.

A valid public IP address must fall outside the private IP address ranges:
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
66.157.195.20 is outside these ranges, making it a public IP address.
Why Not A, C, D: These IPs fall within private IP address ranges.
CompTIA A+ Exam Reference: Core 1 (220-1101), Section 2.6, IP addressing.