Explanation:

The correct answer is A. Imaging drum.
An imaging drum is a part of a laser printer that transfers the toner to the paper. The imaging drum is coated with a photosensitive material that reacts to light and creates an electrostatic charge. The charge attracts the toner particles from the cartridge and forms an image on the drum. The image is then transferred to the paper by heat and pressure from the fuser assembly.
If the imaging drum is defective or damaged, it can cause various printing problems, such as solid black pages, blank pages, streaks, spots, or faded prints. A solid black page can occur when the imaging drum is unable to create a charge pattern on its surface, and instead attracts all the toner from the cartridge. This can happen due to a faulty laser unit, a dirty or scratched drum surface, or a worn-out drum.
To fix this issue, the technician should replace the imaging drum with a new one. The imaging drum usually has a limited lifespan and needs to be replaced periodically. The technician should also check the toner cartridge and the fuser assembly for any signs of damage or leakage123

A video production workstation that will consist of two high-end GPUs will require a lot of power and a modular power supply. A modular power supply allows the technician to connect only the cables that are needed for the components, which reduces clutter and improves airflow. A 1,200W power supply should be enough to power the two GPUs and other components, but the exact wattage depends on the specifications of the GPUs and other components. A 400W external power supply is not enough to power the workstation and may not be compatible with the ATX case. Two 600W redundant power supplies are unnecessary and may not fit in the ATX case. A 1,500W uninterruptible power supply (UPS) is a device that provides backup power in case of a power outage, but it is not a replacement for a power supply unit (PSU). References:
https://www.comptia.org/blog/what-is-a-power-supply-unit

The correct answer is B. Punchdown tool.
A punchdown tool is a device that can connect wires to a patch panel or a network jack by inserting them into the appropriate slots and cutting off the excess. A punchdown tool can be used to fix the damaged LAN ports by replacing the wires or reconnecting them to the correct terminals.
A cable stripper is a device that can remove the insulation from a cable to expose the wires inside. A cable stripper is not useful for fixing the damaged LAN ports, unless the technician needs to strip new wires before punching them down.
A crimper is a device that can attach connectors to the ends of cables, such as RJ-45 or RJ-11. A crimper is not useful for fixing the damaged LAN ports, unless the technician needs to replace the connectors on the cables.
A network tap is a device that can monitor and capture network traffic by creating a copy of the data passing through a network link. A network tap is not useful for fixing the damaged LAN ports, as it does not affect the connectivity of the network devices.
Reference: CompTIA A+ Certification Exam Core 1 Objectives

When a computer frequently freezes and requires hard restarts, the first step a technician should take, especially when hardware components have not been recently changed, is to read the event logs. Event logs can provide critical insights into what is causing the system to freeze, including errors and warnings that precede the freeze. This information is essential for diagnosing software or operating system issues that might be causing instability. Checking the temperature or updating drivers might be subsequent steps based on findings from the event logs.
References:CompTIA A+ Core 1 (220-1101) troubleshooting section, which emphasizes the importance of using system logs to diagnose issues.