644-906 試験問題を無料オンラインアクセス

Refer to the exhibit.

What is the expected behavior for the following Cisco IOS XR config?

• A.The interface will have IPv6 address 20:20::1/64 only.
• B.The interface will have IPv6 address 10:10::1/64 only.
• C.The commit will fail.
• D.The interface will have IPv6 address 10:10::1/64 and IPv6 address 20:20::1/64.

What is the correct procedure to associate a VRF to a static route?

• A.define the VRF in the global configuration
• B.configure the VRF under the interface
• C.specify the VRF under "router static" in configuration mode
• D.specify the VRF in the route global configuration command

What is the maximum long-term normal operating temperature of the Cisco CRS-1, ASR 9000 Series Routers, and XR 12000 Series Routers?

• A.55C (131F)
• B.65C (149F)
• C.40C (104F)
• D.50C (122F)

Where is the LPTS policer applied?

• A.egress line-card egress queue
• B.egress line-card CPU
• C.route processor CPU
• D.ingress line card
• E.distributed RP CPU

The Cisco CRS 16-Slot Line Card Chassis Site Planning Guide suggests having 48 inches of clearance behind the chassis. What would definitely happen to the system if there were only 28 inches of clearance behind the Cisco CRS 16-Slot Line Card Chassis?

• A.The fan tray could not be exchanged if one failed.
• B.The fabric card could not be exchanged if one failed.
• C.The modular services card (MSC) could not be exchanged if one failed.
• D.The system would overheat due to inadequate airflow.