300-610 試験問題を無料オンラインアクセス

When booting from iSCSI while using multipathing, which type of address must be the same on both boot vNICs?

• A.EUI
• B.IQN
• C.WWN
• D.OUI

Which components share a physical interface in a VDC deployment?

• A.two storage VDCs for FCoE traffic
• B.two VDCs for Ethernet traffic
• C.interface VLAN and a VDC
• D.storage VDC for FCoE traffic and a VDC for Ethernet traffic

An engineer must create a solution for server deployment in a multitenant UCS environment with UCS Central. The solution must:
- Make use of centralized WWPN and IP pools.
- Define a unique network configuration for an organization.
Which action creates a solution that meets the requirements?

• A.Set up a local vNIC template and create global service profiles.
• B.Create a local service profile and reference global pools.
• C.Copy global pools to the local organization and reserve a WWPN range.
• D.Configure a global service profile that references local policies.

A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications.
Which action should be implemented for the Fibre Channel traffic from the vHBA of this server to pass through the I/O Module in the Cisco UCS chassis to a specified uplink Fibre Channel port?

• A.Update the applied global QoS policy.
• B.Update the applied Fibre Channel adapter policy.
• C.Enable Persistent Binding in the vHBA policy.
• D.Include a SAN pin group in the vHBA policy.

Drag and Drop Question
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

正解：

Explanation:
https://community.cisco.com/t5/data-center-documents/understanding-fabric-failure-and-failover-in-ucs/ta-p/3112884 In a simple scenario of UCS system with a server with CNA card, following may happen:
a) FI failure : results in fabric failure for all connected UCS chassis b) FEX failure : results in fabric failure for one UCS chassis c) FI-FEX link failure : results in fabric failure for some of the servers within a UCS chassis (depending on number of servers and uplinks) d) One CNA port failure : results in fabric failure for one server In any of the above cases downtime can be eliminated by using redundant hardware and proper config.