300-110 試験問題を無料オンラインアクセス

A customer requires the wireless network to perform real-time analysis to reduce congestion, link usage, and infrastructure upgrades. Which Cisco technology can accomplish this analysis?

• A.802.11r
• B.Application Visibility and Control
• C.QoS
• D.band selection

A customer has a single anchor WLC named Anchor A. Anchor A is in a DMZ and provides guest access.
The customer wants to deploy an additional anchor controller named Anchor B to provide redundancy if Anchor A fails. Which design approach should be taken for the guest WLAN priority on the foreign WLC for each anchor WLC?

• A.Set Anchor A to priority 3 and Anchor B to priority 3.
• B.Set Anchor A to priority 1 and Anchor B to priority 3.
• C.Set Anchor A to priority 3 and Anchor B to priority 1.
• D.Set Anchor A to priority 1 and Anchor B to priority 1.

An engineer is designing a wireless solution for a corporate campus which includes two primary buildings:
Research and Operations. The design must ensure seamless mobility for employees moving between buildings, support uninterrupted connectivity for real-time applications, and facilitate efficient Layer 2 and Layer 3 roaming. Each building ' s 9800-80 WLC manages its local APs, and the solution must support 802.11 r/k/v while maintaining an effective mobility control plane. Which design approach leverages Cisco mobility group architecture to meet the requirements?

• A.Designate the Research building ' s WLC as the primary controller and the Operations building ' s WLC as a secondary controller within a single mobility group to centralize mobility management.
• B.Assign each 9800-80 WLC to separate mobility groups, one for each building, to isolate traffic and mitigate the risk of overloading a single mobility group.
• C.Establish the Operations building ' s WLC as an anchor controller, configuring the Research building ' s WLC to tunnel all client traffic to it for centralized traffic management.
• D.Add both 9800-80 WLCs in a single mobility group with no specific roles assigned, enabling peer-to- peer coordination for seamless roaming across buildings.

Users who leave the office with a wireless headset must be able to hand oft the voice call with minimal disruption. The engineer drafted four possible Door plans for AP placement:
* red dots and arrows represent the direction of travel
* blue dots represent the AP placements
Which floor plan provides the requested functionality?
A)

B)

C)

D)

• A.Floor plan D
• B.Floor plan C
• C.Floor plan B
• D.Floor plan A

A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?

• A.Create a mobility tunnel between WLC-A and WLC-B with the same group name.
• B.Connect WLC-A and WLC-B by using the redundancy port to sync client sessions.
• C.Configure WLC-A and WLC-B in a high-availability cluster and set a mobility MAC address.
• D.Implement AP groups for each building by using the same name on WLC-A and WLC-B.