Civil-Engineering-Technology 試験問題を無料オンラインアクセス

What two municipal plans are required to define a new civil infrastructure project?

• A.Residential/commercial development plan and transportation plan
• B.Residential/commercial development plan and city transit plan
• C.Municipal Development Plan and city transit plan
• D.Municipal Development Plan and Transportation Master Plan

Which of the following is employee's responsibility in regard to PPE?

• A.Receive training on the correct use of PPE.
• B.Select PPE appropriate for the hazard.
• C.Inspect PPE before use.
• D.Ensure PPE is maintained correctly between uses.

In an oil and gas project, the location of a pile is offset by 78 mm north and 54 mm east of the key location plan. The location was stamped and issued for construction by a consulting engineering company. The statement on the drawings says, "Offset more than 75 mm is not accepted." Which of the following is the best approach for the civil engineering technologist to take?

• A.Accept the pile location as is because the offsets are close enough to 100 mm.
• B.Inquire with the client if the pile location is acceptable.
• C.Submit a non-conformance report to the design engineer for review and advice.
• D.Fill up the hole and re-drill the pile hole based on the pile key location plan.

What subsurface sampling would be most likely conducted during a preliminary site investigation for a proposed building?

• A.Proctor densities and final building elevations
• B.Soil samples and borehole logs
• C.Atterberg limits and detailed grading plans
• D.Marshall tests and proposed driveway locations

For a land development project to be initiated, which of the following documents must be submitted to the municipality for approval?

• A.Historical resources overview
• B.Area Structure Plan
• C.Transportation network analysis
• D.Neighbourhood Structure Plan