3000.2 試験問題を無料オンラインアクセス

You are installing a 4 port expansion card into an IP500 to support eight DS 30 and two Phone 30 modules. What is the correct cabling scheme to connect the expansion modules to the TDM expansion ports?

• A.Install the expansion card in slot four of the IP500 and the eight DS 30s cabled to TDM ports 18 using the one meter blue cable; then the two Phone 30s to TDM ports 9-10 using the two meter yellow cables.
• B.Install the expansion card in slot one of the IP500 and the eight DS 30s cabled to TDM ports 18 using the cable that will reach; then the two Phone 30s to TDM ports 9-10 using the cable that will reach.
• C.Install the expansion card in slot one of the IP500 and the eight DS 30s cabled to TDM ports 18 using the one meter blue cable; then the two Phone 30s to TDM ports 9-10 using the two meter yellow cables.
• D.Install the expansion card in slot four of the IP500 and the eight DS 30s cabled to TDM ports 310 using the one meter blue cable; then the two Phone 30s to TDM ports 1-2 using the two meter yellow cables.

A client requests to setup VoiceMail Pro to backup voicemails, user settings, and greeting and module recordings to another server on the LAN for safety on a weekly basis. Which three steps are required? (Choose three.)

• A.Map a drive to an available network share.
• B.Select the mapped drive as the destination on the VoiceMail Pro server.
• C.Create a network share with permissions to store backups.
• D.Select the UNC share as the destination on the VoiceMail Pro server.
• E.Configure the backup settings on the VoiceMail Pro server.

A customer wants all incoming calls routed to the Embedded Voicemail (EVM) auto attendant call flow named AutoAtt. What will satisfy this requirement?

• A.For the ARS, leave the Incoming Number field blank and in the Destination field select AutoAtt from the drop down list options.
• B.For the Incoming Call Route, leave the Incoming Number field blank and in the Destination field select VM:AutoAtt from the drop down list options.
• C.For the Incoming Call Route, leave the Incoming Number field blank and in the Destination field select AA:AutoAtt from the drop down list options.
• D.Create a hunt group called AutoAtt and use hunt group AutoAtt as the Destination field of the Incoming Call Route.

A customer is installing an IP500v2 with one hundred 1600 series IP Phones. The customer has an existing Juniper VPN gateway for their remote workers and would like to provide hard phones for their remote workers to login at home. Which two are needed to accomplish this? (Choose two.)

• A.4620 IP Phone with VPN software
• B.1616 IP Phone with VPN software
• C.VPN Phone license for each remote worker
• D.Modified 46vpnsettings.txt file
• E.VPN gateway for each remote worker

After an IP Office upgrade, the customer reports that "Please Wait" continuously appears on the 5420 DS phone. What will resolve the problem?

• A.If IP Office does not restart correctly; power-off and power-on IP Office and the problem will be corrected.
• B.The CCR lost connection to IP Office; just wait until the LED on the CCR status turns green again and the phone will start to work.
• C.The 5420 DS is no longer supported.
• D.The 5420 DS is corrupted and must be replaced.
• E.Start the IP Office Manager application.