Every computer has a CMOS battery and when you remove that battery, your computer will work almost the same as before. The only difference is you won't be able to save any settings in the BIOS, which includes the date and time. If your PC is not booting after removing CMOS, you need to make sure that you have your CPU and RAM connected because it's not possible for your system to boot without those.. Your motherboard and computer will be able to boot just fine even without a CMOS battery present. The only issue is all your BIOS settings will be reset and the time and date will be inaccurate. You will also be unable to save BIOS settings.

The symptoms described, such as the operating system taking longer than usual to load and hearing clicking sounds from within the workstation, are indicative of a failing hard drive. Clicking sounds, often referred to as the "click of death," signal the read/write head of the hard drive struggling to function properly. This mechanical failure leads to longer load times as the system struggles to read data from the disk. It is crucial to back up data and consider replacing the hard drive to prevent data loss.

If a color laser printer's image quality decreases after being serviced for dust removal, it's likely that the servicing process affected the printer's calibration. Calibration ensures that color reproduction is accurate, and if disturbed, can lead to a decrease in image quality. It's important to check and recalibrate the printer to restore its ability to accurately reproduce colors and maintain high image quality.
References:
* CompTIA A+ Core 1 (220-1101) Exam Objectives, particularly the sections dealing with printer maintenance, troubleshooting, and the importance of calibration in maintaining image quality in laser printers.
* Knowledge of printer maintenance procedures and their impact on printer performance, with a focus on how calibration affects color accuracy and overall image quality.

Cleaning the air filter is the best action to resolve the issue of a projector that shuts down after fifteen minutes of use. A dirty air filter can cause overheating and trigger the projector's thermal protection mechanism. Replacing the video input cable, changing the bulb, or swapping the power cord are unlikely to solve the overheating issue

Based on the information recorded by the technician, the network connection appears to be functioning normally. The user's computer is properly configured with an IPv4 address, subnet mask, and default gateway, which should allow the user to access the internet and online videos. The high download and upload speeds and low ping time recorded from the test laptop also indicate that the network is working well. However, the user's inability to watch online videos suggests that there might be an issue with the network card (NIC) on the user's computer. The NIC might be faulty or malfunctioning, which is preventing the computer from receiving and processing the video data. The technician should try replacing the NIC to resolve the issue.