VGA (Video Graphics Array) cables transmit analog video signals only and do not carry audio signals. When a user connects a laptop to an audiovisual system using a VGA cable, the lack of audio is due to VGA's inability to transmit sound. Switching to an HDMI (High-Definition Multimedia Interface) cable, which supports both audio and video signals, will most likely resolve the issue by enabling the transmission of sound to the audiovisual system alongside the video.
Reference:
CompTIA A+ Core 1 (220-1101) Exam Objectives, specifically sections related to peripherals and connectors, which would cover the capabilities of different types of cables and connectors, including VGA and HDMI.
Basic understanding of the functionality of common video and audio cables and connectors, emphasizing the distinction between VGA cables, which only support video signals, and HDMI cables, which support both video and audio signals.

The correct answer is B. Check the power supply wattage rating.
A possible cause of the desktop randomly shutting down during operations is that the power supply is not able to provide enough power for the high-end graphics card. The power consumption of today's graphics cards has increased a lot, and the top models demand between 110 and 270 watts from the power supply1. Therefore, the technician should check the power supply wattage rating and make sure it is sufficient for the graphics card and the rest of the components. Confirming the power supply is grounded, checking whether the power supply is redundant, or confirming the power cables are well connected are not likely to solve this problem.

The administrator should use RAID 0 for a video-rendering workstation at minimal cost. RAID 0, also known as striping, is a RAID configuration that splits data evenly across two or more disks, without parity information, redundancy, or fault tolerance. RAID 0 has the following advantages and disadvantages:
High read/write performance: RAID 0 can increase the data transfer rate by using multiple disks in parallel. This can improve the speed and efficiency of video rendering, which involves processing large amounts of dat a. RAID 0 can also reduce the latency and seek time of the disks, as the data is distributed across multiple spindles.
Maximum drive storage utilization: RAID 0 can use the full capacity of the disks, without wasting any space for parity or mirroring. This can lower the cost and increase the storage space for the workstation. For example, if two 500 GB disks are used in RAID 0, the total capacity of the array will be 1000 GB.
No redundancy or fault tolerance: RAID 0 does not provide any protection against data loss or disk failure. If one disk fails, the entire array will fail and the data will be unrecoverable. Therefore, RAID 0 should only be used for non-critical data that is backed up elsewhere, or for temporary files that can be recreated.
Reference:
Standard RAID levels - Wikipedia1
RAID Levels and Types Explained: Differences and Benefits of Each2
RAID Level Comparison Table | RAID Data Recovery Services3

The next thing that the technician should investigate is D. Radio frequency.
Radio frequency is the range of electromagnetic waves that are used to transmit wireless signals. Different devices and networks use different radio frequencies, such as 2.4 GHz or 5 GHz, to communicate with each other. If there are multiple devices or networks using the same or overlapping radio frequencies, they can interfere with each other and cause Wi-Fi connection issues, such as intermittent disconnections, slow speeds, or poor quality .
To fix this issue, the technician can try changing the radio frequency or channel of the router or the laptop, to avoid interference from other sources. The technician can also use a tool such as Wi-Fi Analyzer to scan the nearby wireless networks and find the best frequency or channel to use. Alternatively, the technician can move the router or the laptop to a different location, away from potential sources of interference, such as cordless phones, microwaves, Bluetooth devices, or other routers .
The other options are less likely to be the reason for the issue. Firewall settings are software configurations that control the network traffic and security of a device. They may block some websites or applications from accessing the internet, but they should not affect the Wi-Fi connection itself. MAC address filter is a feature that allows the router to restrict access to specific devices based on their MAC addresses, which are unique identifiers for network interfaces. If the MAC address filter is enabled and the laptop's MAC address is not on the allowed list, it will not be able to connect to the Wi-Fi network at all, not intermittently. Number of connected devices is the amount of devices that are using the same Wi-Fi network at the same time. This may affect the network performance or bandwidth, but it should not cause intermittent disconnections, unless the network is overloaded or unstable.
Reference:
1: How To Fix WiFi Connection Problems - Help Desk Geek
2: How to Fix Your WiFi Connection Problems - Lifewire
3: Wi-Fi Analyzer - Apps on Google Play

A Hardware Security Module (HSM) securely manages cryptographic keys, including those used to protect credit card chips.
Why Not A (TLS): TLS secures data in transit, not encryption key storage.
Why Not B (AMD): AMD refers to processors, not security modules.
Why Not D (ARM): ARM is a processor architecture, not a cryptographic security solution.
CompTIA A+ Exam Reference: Core 2 (220-1102), Section 2.5, cryptographic hardware.